Skip to main content

Kanpur Plastipack Ltd. | Blog

+91 512 2691113 Company Profile (PDF)
Request QuoteQuote

Contact / Get a Quote

(D) To be developed · (C) Content pending
FIBC Industry Insights

What is the difference between geotextile and geocomposite?

8 min read By Kanpur Plastipack Team

Geocomposite vs Geotextile: Understanding the Difference Before You Specify

Both geotextile and geocomposite applications include soil, water, and structural load management in civil infrastructure and environmental engineering. Geocomposites and geotextiles are often used interchangeably and therefore confused with each other; however, they are manufactured differently, behave differently, and serve significantly different purposes.

Understanding this distinction properly at the design or purchase phase can help lower costs and avoid performance failures while guaranteeing that the proper material reaches the intended application.

The following is an explanation of the differences between geotextile vs geocomposite, so that engineers, procurement staff, and project leads can confidently specify.

What Is a Geotextile?

A geotextile is a permeable (or “breathable”) synthetic polymer fabric made from common synthetic polymers including polypropylene or polyester that is installed in contact with soils, rocks, or other geotechnical materials for the purpose of improving performance for various civil engineering applications.

A geotextile fabric may be either woven or non-woven. A “woven” geotextile is produced by interlacing yarn in accordance with an established pattern to create a durable, dimensionally stable fabric suitable for those applications that require a high tensile strength. A “non-woven” geotextile, on the other hand, is produced by bonding together (using adhesive), generally, or through mechanical (needle punching) means, or through some combination of both, individual fibres to produce a fabric more appropriate for applications with respect to drainage and filtering (no water barrier).

Most of the applications for geotextiles can be categorized into three main geotextile functions: separation, filtration, or reinforcement.

Separation prevents different soil types from intermixing, which maintains the performance of both soil types over time. This is especially crucial on roads, where keeping the underlying soil (subgrade) separated from the aggregate base layer is required.

Filtration allows water to flow through the geotextile while trapping/filtering out soil particles, so clogged drain systems can be prevented.

Reinforcement adds tensile strength to weak or unstable soil types, so soil can distribute loads evenly and reduce the amount of deformation that happens when applying a load to the soil.

Other geotextile functions include drainage, where a geotextile acts as a conduit for water flowing through the structure, and protecting geomembranes or other materials from being punctured.

What Is a Geocomposite?

A geocomposite is a manufactured composite that brings together two or more components of geosynthetic materials into one product that can perform multiple functions at the same time that cannot be done with one geosynthetic material on its own.

The most common examples of geocomposites involve the combination of a drainage core and a geotextile filter layer or a geomembrane and a geotextile to provide a single layer of either containing or protecting (or both) the geomaterial below it.

Geocomposites are made to be designed for multi-functionality; while a geotextile is used for one principal function, a geocomposite is specified when an installation requires two or more functions of one geomaterial simultaneously from one layer.

When to Use Geotextile vs Geocomposite

The choice between when to use geotextile vs geocomposite will depend on the requirements of the application and the number of functions that need to be performed at the location of the installation.

Use a geotextile when: A geotextile should be used where there is only one primary function to be performed, such as separation between the subgrade and the aggregate of a roadway, filtration around a drainage pipe or reinforcing the foundation of an embankment in soft soil. Woven geotextiles are typically specified for use for separating and reinforcing purposes. Non-woven geotextiles will typically be used for filtration and protection purposes.

Use a geocomposite when: A geocomposite should be used where there are two or more functions to be performed in an area that may be constrained or otherwise difficult to install. Common geocomposite examples include tunnel linings, drainage systems for retaining walls, green roof build-ups and landfill closure systems. In these cases, space limitations, installation efficiency or performance criteria cause the combined product to be a more practical and responsive solution than using separate products.

With respect to drainage applications, a woven geotextile vs geocomposite comparison makes it clear that a woven geotextile alone does not have the capability to provide as great a flow rate for draining water as a geocomposite drainage core would. Therefore, in terms of specification, a geocomposite is the correct specification when drainage output is a major functionality, along with filtration capabilities.

Sector-Specific Applications

Roads and Highways: Woven geotextiles will be used for separation and reinforcement of the subbase, and non-woven geotextiles will be used as filter layers on drainage systems.

Retaining Walls: Geocomposite products provide a single product with both drainage and filtration capabilities in one sheet, which will help to reduce the accumulation of hydrostatic pressure behind a retaining wall.

Tunnels and Other Underground Structures: Geocomposite products utilized for waterproofing and drainage in a tunnel system will control ingress of groundwater while protecting the primary lining system.

Landfill and Environmental Containment: Geocomposites will combine geomembrane barriers and geotextiles for leachate management and capping applications.

Green Roof and Landscaping: Geocomposite products used as drainage and filtration systems for retaining water and draining water in limited depths of build-up.

Coastal and Erosion Control: Woven geotextiles will be used for erosion control and slope protection on embankments and coastal revetments.

Comparison Table

Feature Geotextile Geocomposite
Composition Single fabric layer (woven or non-woven) Two or more geosynthetic materials combined
Primary Functions One function at a time Multiple functions simultaneously
Woven Type Best for Separation, reinforcement –
Non Woven Type Best for Filtration, protection –
Drainage Capacity Limited (filtration only) High in-plane flow rates via drainage core
Typical Applications Roads, embankments, drainage pipes Retaining walls, tunnels, green roofs, landfills
Install Complexity Single-layer, straightforward Replaces multiple layers in one product
Space Constraints Less suitable Ideal for constrained builds
Specify When One primary performance requirement Two or more performance requirements
Common Functions Separation, filtration, reinforcement Drainage + filtration, containment + protection

Kanpur Plastipack: Solutions for Geocomposites and Geotextiles

Kanpur Plastipack, manufacturers of road construction, drainage, retaining walls, and environmental containment geosynthetic products, is a recognized woven geotextile sheet supplier in India and a leading geocomposite manufacturer India.

With a manufacturing background going back more than 50 years, KPL supplies and manufactures geosynthetic products for both domestic and international projects within the civil engineering and infrastructure industry. In addition to geosynthetics, KPL also manufactures mega bags and other woven packaging materials, maintaining the same rigorous quality standards across all product lines. The quality standards associated with KPL’s different product areas (FIBC and woven packaging materials) are the same as for KPL’s geosynthetic products. KPL has certification in its Kanpur production facility.

Final Thoughts

The distinction in the geotextile vs geocomposite debate is not just about using different technical terms. It is also a specification decision that affects project performance, the cost-effective installation of materials, and the long-term durability of materials. If an application has only one primary requirement, geotextiles are a good option. However, geocomposite materials are a better option when an application has multiple requirements.

Inaccurately specifying a product will increase the likelihood of product failure and remediation costs, and of the installed product at the construction site not matching the original design specifications.

Frequently Asked Questions

1. What are the key distinctions between a geotextile and a geocomposite?

A geotextile is primarily a single type of fabric, either woven or non-woven, and it has a specific function with respect to separation, filtration, or reinforcing. A geocomposite is comprised of two or more different types of geosynthetics combined into one product so that all of the geosynthetics contained can function together in one function at the same time. The specification for either type of geosynthetic will be dependent upon how many performance requirements are in common by the installation layer under consideration.

2. Under which situations should I specify a geotextile rather than a geocomposite?

If your application demands primarily one performance function, you will want to specify a geotextile. For example, a woven geotextile would typically be used for separation and reinforcing applications. A non-woven geotextile should be the preferred product when used for filtering through or around drainage systems or for protecting geomembranes; therefore, if you need drainage capability as well as filtration in your application, then a geocomposite is the appropriate specification.

3. What are the key functions of a geotextile?

The primary geotextile functions are separation, filtration and to provide support. In addition, a geotextile can also provide secondary functions for allowing water to drain when it is placed in a structure, and protecting adjacent materials from being damaged by mechanical means. The principal use of a geotextile will dictate whether a woven or non-woven geotextile is the best product for that purpose.

4. Can geocomposites and woven geotextiles be used interchangeably in drainage systems?

Generally speaking, no. A direct woven geotextile vs geocomposite comparison in drainage operations reveals that woven geotextiles only provide filtration/separation, whereas geocomposites provide the required in-plane drainage flow rates. When considering both filtration/separation and drainage (the amount of drainage to be handled) therefore, the geocomposite is specified as the best option.

5. Does Kanpur Plastipack manufacture both woven geotextiles & geocomposites?

Yes, Kanpur Plastipack (KPL) is a leading geocomposite manufacturer in India and a trusted woven geotextile sheet supplier in India. The company produces the following types of geosynthetic materials for road building, drainage systems, retaining walls, environmental containment, etc. The company’s manufacturing facility has been approved to manufacture both geotextiles & geocomposites, and these products can be sold domestically or exported from India