Skip to main content

Kanpur Plastipack Ltd. | Blog

+91 512 2691113 Company Profile (PDF)
Request QuoteQuote

Contact / Get a Quote

(D) To be developed · (C) Content pending
FIBC Industry Insights

Anti-Static or Static Protective Bags

4 min read By Kanpur Plastipack Team

An imbalance of electric charges within or on the surface of a substance results in static electricity. The charge persists until it can be expelled via an electrical discharge or current. The name “static electricity” refers to the opposite of “current electricity,” which conveys energy by flowing via wires or other conductors.

When two surfaces come into touch, wear away, then separate from one another while at least one of the surfaces has a high resistance to electric current, a static electric charge can be produced (and is therefore an electrical insulator). Most people are familiar with static electricity’s effects because when it is brought close to a big electrical conductor, the extra charge is neutralized by a spark that may be felt, heard, and even seen.

Flexible Intermediate Bulk Containers (FIBCs)

FIBCs are suited for use in a variety of industries because they are now frequently utilized for the transportation of dry bulk items such as fertilizers, plastic granules, seeds, resin, and powders. They are, nonetheless, prone to the creation of electrostatic charge. Triboelectrification, a process that brings powders and other granular materials into contact, rubs them together, and causes them to separate, causes this to happen. It is now known that static electrical discharges from unground FIBC bags during loading and unloading might cause an explosion by igniting delicate, combustible atmospheres. This electrostatic charge may build up on both the material’s fabric and the product’s contents.

The inherent electrostatic discharge hazard from the substance cannot be disregarded because many items are flammable. Eliminating the possibility of an electrical ignition in these circumstances is crucial. Always make sure the FIBCs are compliant with IEC 61340-4-4 Ed. 3.0 for testing and labeling, and that the kind of static protective FIBC in use is suitable for the flammable or explosive atmosphere.

To regulate the static charge connected with particular procedures, bags can be broadly categorised into three categories:

Type-B FIBCs

  • Type “B” bags are made of insulating fabric that has a breakdown voltage under 6 kV. The risk of energetic sparks and spreading brush discharges, which can ignite dust-air mixes, combustible gases, and solvent vapours, is reduced by this provision.
  • Only when there is no hazardous gas vapours present and there are combustible dust specks with MIE more than 3mJ can type “B” bags be used.
  • Although type “B” bags are occasionally referred to as anti-static bags, it should be noted that they offer only a minimal level of defence against static electricity and no mechanism for dispersing static charge.

        ? Used safely to transport dry, combustible powders (MIE > 3 mJ)
        ? There are to be no flammable solvents or gases present around the bag
        ? DO NOT USE to transport flammable products (MIE < 3 mJ)

Type-C FIBCs

A type “C” bag is made of materials with connected conductive threads and is intended to stop incendiary sparks, brush discharges, and spreading brush discharges from happening. The FIBC must be totally made of conductive material, or at the very least, it must have fully interconnected conductive threads or tapes with a maximum spacing of 50 mm for grid patterns and 20 mm for stripe patterns. During filling and emptying, the bag must be electrically grounded.

  • Used safely to transport flammable powders (MIE < 3 mJ)
  • Used safely when flammable solvents or gases are present around the bag
  • DO NOT USE when the ground connection is not present or has become damaged

Type-D FIBCs
A type “D” bag is constructed from static protective fabric that includes interwoven static dissipative threads and is designed to prevent the occurrence of incendiary sparks, brush discharges, and propagating brush discharges. Type D FIBCs are made from material that has an insulating layer (e.g. coating film or lamination) on the inside of the container Type D FIBCs do not require grounding.

  • Used safely to transport flammable powders (MIE < 3 mJ)
  • Used safely when flammable solvents or gases are present around the bag
  • DO NOT USE when the surface is contaminated or coated with conductive products such as water or grease.

Customized packaging solutions like anti-static FIBC bags are effective at reducing workplace electrostatic discharge and shocks while also enhancing worker safety. Because of the security that FIBCs provide, the market for these bags is continuously growing.

At Kanpur Plastipack all of our packaging products are produced with quality at their core.

Ambiguous about which option is best for your requirements?

Get in contact with us to get in touch with one of our experts and receive the ideal FIBC or Jumbo bag variety for your business!

At Kanpur Plastipack, we manufacture myriad types of FIBCs to cater & to satisfy the diverse & customizable needs of our clients. Think FIBC, Think KPL!