Skip to main content

Kanpur Plastipack Ltd. | Blog

+91 512 2691113 Company Profile (PDF)
Request QuoteQuote

Contact / Get a Quote

(D) To be developed · (C) Content pending
FIBC Industry Insights

Type C Anti-Static FIBC Bags for the Chemical Industry: Safety Standards, Uses and How to Choose the Right Supplier

11 min read By Kanpur Plastipack Team

Type C Anti-Static FIBC Bags: What You Need to Know

The chemical industry has no room for error. When you’re shipping flammable powders, reactive granules, or hazardous materials in bulk, the packaging needs to hold up under an extreme amount of pressure. A single static discharge can ignite a fire or cause an explosion, and the result is that your entire operation is shut down if you’re found to be out of compliance. That’s why Type C FIBC bag chemical industry have become so critical to the global chemical industry.

This guide will provide you with an explanation of the Type C anti-static FIBC Bag, the safety requirements that apply to these bags, where they are typically used, and what you should look for when selecting a supplier who will not sacrifice quality on any of these fronts.

What Are Type C FIBC Bags Chemical Industry?

Type C FIBC bags, also known as conductive bulk bags or grounded FIBC bags, are specially designed flexible intermediate bulk containers for environments where static discharge poses a significant safety risk. Unlike standard polypropylene bags, Type C bags are woven with a system of conductive threads, usually made from carbon-loaded or metallic fibers, to create a continuous pathway for static electricity to safely dissipate to ground.

The crucial condition for these bags to function properly: they must be connected to a verified ground point when filling and emptying. If the bag isn’t grounded, the anti-static mechanism is completely ineffective. This is the only condition you absolutely cannot compromise on when working with Type C conductive bulk bags.

Type C bags fit into a broader classification system for FIBCs, which also includes Type A, B, and D bags, each offering a different level of static protection. Type C bags are the best choice for areas where flammable gases, vapors, or combustible dusts are present during bulk material handling.

The Governing Safety Standard: IEC 61340-4-4

Type C FIBC bags used in the chemical industry must be discussed in relation to the Governing Standard, IEC 61340-4-4. The IEC 61340-4-4 standard classifies FIBC bags into different types depending on their electrostatic properties and guides safe use of them in potentially dangerous or explosive environments.

The standard provides a measurement called the Minimum Ignition Energy (MIE). The MIE is defined as the minimum amount of energy that can ignite the bulk material contained within an FIBC. Type C bags are designed for materials with an MIE of less than 3mJ. Examples of these types of materials are resins, titanium dioxide, bisphenol A, and various types of fine organic powders, which comprise a large number of products commonly found in the chemical manufacturing sector.

Additionally, IEC 61340-4-4 outlines the testing methods that suppliers and manufacturers must follow to prove the compliance of the FIBC. When a manufacturer states that they produce Type C bulk bags IEC 61340 standard, you must ask for the test certificate(s) and not just the product description. Confirming their compliance is the basis for determining the difference between packaging that keeps your facility safe and packaging that provides a false sense of security.

Other regulations that could exist in the marketplace, alongside IEC 61340-4-4, depending on where the manufacturer/supplier sells their products globally, are Compliance with ATEX Zones 1 and 2 and Guidelines for Compliance with NFPA 77 for manufacturers/suppliers operating in the chemical manufacturing industry and exporting types C FIBCs to international markets.

The Need For Anti-Static FIBC Bags In The Chemical Industry

Static electricity has a tendency to build up anytime there is a movement of bulk materials (due to friction, particle-to-particle collision, and movement through filling and emptying). In most industries, this is an annoyance; however, in the chemical industry, it can cause catastrophic consequences. There are various ways that static electricity could become charged to the point of creating a discharge from an FIBC bag, causing ignition. First, consider the potentials of igniting by static electricity in a bag filled with flammable product. Second, we consider that there are likely to be various sources of ignition all around the FIBC bag due to the potential presence of flammable vapors, solvent fumes, or combustible dust present in the surroundings of chemical manufacturing and/or storage facilities. Therefore, an unprotected FIBC bag could create a discharge of static to ignite the FIBC bags flammable materials located in the area. The proper use of an FIBC bag, type C conductive bulk bag, will address both of these requirements for the handling of flammable chemicals: creating the ability to control the static charge that will build up on the bag during the process of using the FIBC bag as well as allowing for a reliable method for safely dissipating any charge that would have built up on the bag before reaching the point of ignition. Type C conductive bulk bags require that the bag be properly grounded to ensure that there is a safe method for the static electricity (the built-up static charge) to return to a ground reference point proactively.

Commonly used chemical industry materials that require the use of Type C bags:

  • Carbon Black And Pigments
  • Synthetic Resins And Polymers
  • Titanium Dioxide And Bisphenol A
  • Fertilizers And Agrochemicals
  • Powdered Solvents And Reactive Compounds
  • Fine Plastic Granules And Masterbatch Powders

Industries Using Type C FIBC bags for Chemical Industry

Chemical Mixing/Blending: Transferring flammable/reactive powders to mixing equipment is an associated static discharge risk at the transfer point.

Bulk HazMat Storage: Storing grounded FIBC bags hazardous goods containing sensitive materials in warehousing can reduce the static risk during the long-term ambient accumulation of static while the goods are in static storage.

Export Packaging of HazMat: Type C FIBC bags chemical industry (and UN-certified) will be required by transport regulations to ship hazardous materials internationally, particularly when the materials are classified as Dangerous Goods under UN regulations.

Pharmaceutical Ingredient Processing: The active pharmaceutical ingredients (API) and powdered excipients used in drug production are often processed in shared or proximity chemical facilities with similar static hazards, even though this is a separate industry.

Plastic/Poylmer Production: Type C FIBCs are typically used to transport combustible granules (e.g., polyethylene, polystyrene, or similar) during production or in outbound logistics.

How to Choose the Right Anti-Static FIBC Bags Supplier

Choosing an anti-static FIBC bag supplier is not just a buying decision. It is also a key safety factor. Here are a few key points to consider:

1. Verified Compliance with IEC 61340-4-4

Do not accept a supplier’s claim of compliance without obtaining documented proof in the form of test certificates. A qualified supplier of conductive bulk bags for the chemical industry will provide you with proof that their bags have been tested according to the standards defined in this specification. In addition to obtaining test records for each bag, you should confirm the bag’s construction (including fabric type) and specifications related to conductive thread and resistance against the test certificate.

2. In-House Testing Capabilities

If you work with raw materials that have very low minimum ignition energy (MIE) values, it is important to consider suppliers that have in-house testing capabilities. Suppliers that conduct their own testing can establish their own quality assurance standards from the point of raw material through the production of finished bags. Even though third-party testing provides an additional level of verification, suppliers that have in-house testing capabilities may provide better quality control of the manufacturing process.

3. Customization to Meet Your Material Needs

Different chemicals have different physical and chemical properties; therefore, Type C bags will not all work the same for all chemicals. The construction parameters of the bag, such as fabric weight (GSM), loop type, liner and spout configuration, and the physical and/or chemical characteristics of the chemical you will be placing in the bags will all affect the performance of the bag for that specific chemical. A competent anti-static FIBC bag supplier will ask you about the chemical(s) you will be placing in the bags and recommend the proper bag specifications based on the chemical(s) you will be using.

4. UN Certification Required for Hazardous Materials 

If the materials are classified as UN Dangerous Goods, then the bag will require UN certification independent from any IEC compliance. The UN certification ensures the bag has the necessary structural integrity for safe transportation.

5. Experience with Chemical Clients

A supplier that has a significant track record with chemical clients (including references, case studies, or industry associations) will better understand the unique requirements of your operation, be able to assist with proper handling methods (which are critical for Type C bags due to their requirement to be grounded), and have the experience needed to recommend appropriate products.

6. Delivery Times & Production Consistency

Chemical manufacturing companies have strict schedules and require consistent delivery from their suppliers. Therefore, suppliers who are unable to supply material reliably or increase their production capacity as your volumes grow will likely become a problem for you. Before making any commitments to a supplier, determine their facility size, production capacity, and historical performance.

Trust in Kanplas as Your Strategic Provider for Chemical Sector FIBC Requirements

As a leading manufacturer of Flexible Intermediate Bulk Containers (FIBCs), Kanplas (Kanpur Plastipack Limited, KPL) has established itself as an FIBC manufacturer through decades of experience, having been founded over 50 years ago with just a handful of founders now expanded to a full staff of over 3000 globally. KPL has three fully-equipped production facilities producing FIBCs in excess of 900,000 square feet of production capacity within the city limits of Kanpur and serving customers in excess of 40 countries.

In the context of the chemical industry, Kanplas FIBCs are designed and manufactured with anti-static and conductive properties. These FIBCs are specifically engineered to mitigate the risk of static discharge, which is crucial when handling or transporting hazardous materials or products that are sensitive to static discharge. As the first FIBC manufacturer in India to have obtained BRCGS A+ certification, Kanplas conforms to international standards related to FIBCs and the chemical industry.

Kanplas can provide customized FIBC solutions to meet your specific needs, including, but not limited to: the weight of fabric to be utilized for your FIBCs, the type of loop and orientation that you require for your particular use and/or configuration for discharging your products. Furthermore, we have the necessary testing facilities and worldwide history of exports to provide the scale and consistency necessary to support your operations.

Final Thoughts

Type C FIBC bags are not an upgrade; they are a must for anyone dealing with flammable or electrostatically sensitive materials in bulk. The chemistry of the matter is simple: static discharge + combustible material = danger. When designed correctly and used in conjunction with proper grounding, Type C conductive bulk bag chemical industry negates that risk at the packaging level.

However, the bag is only as reliable as the manufacturer that produced it. IEC 61340-4-4 compliance, in-house testing, experience in your sector, and consistent production capabilities are the metrics that distinguish legitimate, safe sourcing from a gamble. Partner with Kanplas and work with a manufacturer that has been crafting bags according to global standards for over five decades, and one who understands that in your industry, a bag’s performance is a safety issue.

Frequently Asked Questions

1. What makes a Type C FIBC bag different from Type A or Type B?

Type A bags do not provide static protection. Type B bags prevent propagating brush discharges but not flammable vapors or gases. Type C bags contain a grid of conductive fibers that conduct static charge to ground, making them safe to use with materials whose Minimum Ignition Energy is below 3 mJ, like many chemical industry powders and granules.

2. Is grounding always required for Type C FIBC bags?

Yes, always. Type C conductive FIBC bulk bags must be grounded to a verified earth ground before and during loading and unloading. Without it, the static protection is effectively neutralized, and the risk returns to that of an unprotected bag.

3. What is IEC 61340-4-4 and why is it important?

IEC 61340-4-4 is the international standard that classifies FIBCs according to their electrostatic properties and which type of FIBC is appropriate for specific hazardous environments. Compliance with IEC 61340-4-4 is the recognized standard for safe Type C bulk bag use in the chemical industry and is often a legal requirement in many countries for bulk hazardous materials.

4. Which specific chemical materials require Type C FIBC bags?

Type C specification applies to any material whose Minimum Ignition Energy is less than 3 mJ. These include resins, titanium dioxide, bisphenol A, carbon black, synthetic polymers, many types of fertilizers, and fine reactive powders. Your bag manufacturer or a certified safety professional should be able to guide you in testing your material according to the IEC standard.

5. How do I know that an anti-static FIBC bag supplier is truly compliant?

Request test certificates for your FIBCs which reference IEC 61340-4-4. Review documented resistance values and specifications for consistency with what you have ordered and also ask about correct grounding procedures. If your material is a regulated hazard commodity, ensure that UN certification is also available; look for third-party accreditations, like ISO or BRCGS, as an additional indicator of quality assurance.